ECMM, DOCSIS 3.0, 2xGE, 2xMCX, SA120IE

ʻO ka wehewehe pōkole:

ʻO ka MoreLink's SA120IE he DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) e kākoʻo ana i ka 8 downstream a me 4 upstream bonded channels e hāʻawi i kahi ʻike pūnaewele wikiwiki kiʻekiʻe.

ʻO ka SA120IE ka wela paʻakikī no ka hoʻohui ʻana i nā huahana ʻē aʻe i koi ʻia e hana ma waho a i ʻole ka wela wela.

E hoʻouna i ka leka uila iā mākou

Huahana Huahana

ʻO ka SA120IE ka wela paʻakikī no ka hoʻohui ʻana i nā huahana ʻē aʻe i koi ʻia e hana ma waho a i ʻole ka wela wela.

Ma muli o ka hana Full Band Capture (FBC), ʻaʻole ʻo SA120IE he Cable Modem wale nō, akā hiki ke hoʻohana ʻia ma ke ʻano he Spectrum Analyzer.

Hoʻopili kēia kikoʻī huahana i nā mana DOCSIS® a me EuroDOCSIS® 3.0 o ka moʻo o nā huahana Embedded Cable Modem Module.Ma ka hoʻokomo ʻana i kēia palapala, e kapa ʻia ʻo ia ʻo SA120IE. ʻO ka SA120IE ka wela paʻakikī no ka hoʻohui ʻana i nā huahana ʻē aʻe i koi ʻia e hana i ka ʻoihana waho a i ʻole ka wela wela.Ma muli o ka hana Full Band Capture (FBC), ʻaʻole ʻo SA120IE he Cable Modem wale nō, akā hiki ke hoʻohana ʻia ma ke ʻano he Spectrum Analyzer (SSA-Splendidtel Spectrum Analyzer).He mea pono ka Heatsink a pono e noi.Hāʻawi ʻia ʻekolu puka PCB a puni ka CPU, i hiki ke hoʻopili ʻia kahi bracket heatsinking a i ʻole mea like me ka PCB, e hoʻoneʻe i ka wela i hana ʻia mai ka CPU a i ka hale a me ke kaiapuni.

Nā hiʻohiʻona huahana

➢ DOCSIS / EuroDOCSIS 3.0 kūpono

➢ 8 i lalo x 4 mau auwai paʻa i luna

➢ Kākoʻo i ka hoʻopaʻa ʻana i ka hui piha

➢ ʻElua mau mea hoʻohui MCX (Female) no ke kahawai i lalo a i luna

➢ ʻElua mau awa Ethernet 10/100/1000 Mbps

➢ ʻīlio kiaʻi kūwaho

➢ ʻIke wela ma luna o ka moku

➢ Ka pae mana RF pololei (+/-2dB) ma nā pae wela a pau

➢ Analyzer Spectrum i hoʻokomo ʻia (Lawe: 5~1002 MHz)

➢ Kākoʻo ʻia nā MIB DOCSIS, SCTE HMS MIB

➢ Hoʻonui polokalamu ma ka pūnaewele HFC

➢ Kākoʻo iā SNMP V1/V2/V3

➢ Kākoʻo i ka hoʻopunipuni pilikino baseline (BPI/BPI+)

➢ Nui liʻiliʻi (nā ana): 136mm x 54mm

Palapala noi

➢ Transponder: Node Fiber, UPS, Mea Mana.

Nā ʻāpana ʻenehana

Kākoʻo Kākoʻo
DOCSIS/EuroDOCSIS 1.1/2.0/3.0 SNMP v1/v2/v3 TR069
Hoʻohui
RF: MCX1, MCX2		ʻElua MCX Wahine, 75 OHM, Pololei, DIP
Hōʻailona Ethernet/PWR: J1, J2		1.27mm 2x17 PCB ahu, kihi pololei, SMD 2xGiga Ethernet awa
RF i lalo
Ka pinepine		88~1002 MHz (DOCSIS) 108~1002 MHz (EuroDOCSIS)
Kanal Bandwidth		6 MHz (DOCSIS) 8 MHz (EuroDOCSIS) 6/8 MHz (Hōʻike Aunoa, Ke ʻano Hybrid)
Hoʻololi		64QAM, 256QAM
Ka helu ʻikepili		A hiki i 400 Mbps e 8 Channel hoʻopaʻa
Kaulana hōʻailona		Palapala: -15 a +15 dBmV Euro Docsis: -17 a +13 dBmV (64QAM);-13 a +17 dBmV (256QAM)
RF Upstream
Laulā pinepine		5~42 MHz (DOCSIS) 5~65 MHz (EuroDOCSIS) 5~85 MHz (Koho)
Hoʻololi		TDMA: QPSK,8QAM,16QAM,32QAM,64QAM S-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM
Ka helu ʻikepili		A hiki i 108 Mbps e 4 Channel Bonding
RF Puka Puke		TDMA (32/64 QAM): +17 ~ +57 dBmV TDMA (8/16 QAM): +17 ~ +58 dBmV TDMA (QPSK): +17 ~ +61 dBmV S-CDMA: +17 ~ +56 dBmV
Hoʻopili pūnaewele
ʻO ka protocol network		IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 a me L3)
Ke alahele		DNS / DHCP server / RIP I a me II
Kaʻana Pūnaewele		NAT / NAPT / kikowaena DHCP / DNS
Mana SNMP		SNMP v1/v2/v3
kikowaena DHCP		ʻO kahi kikowaena DHCP i kūkulu ʻia e puʻunaue i ka helu IP i CPE e ka awa Ethernet o CM
Mea kūʻai aku DCHP		Loaʻa iā CM ka IP a me ka helu kikowaena DNS mai ka server MSO DHCP
Mechanical
Anana		56mm (W) x 113mm (L)
Kaiapuni
Hookomo mana		Kākoʻo i ka hoʻokomo mana ākea: + 12V a i + 24V DC
Hoʻohana mana		12W (Max.) 7W (TPY.)
Ka Mahana Hana		Kalepa: 0 ~ +70^oC ʻOihana: -40 ~ +85^oC
ʻO ka haʻahaʻa hana		10~90% (Non Condensing)
Ka Mahana Waihona		-40 ~ +85^oC

Nā mea hoʻohui Papa-i-Papa ma waena o Digital a me CM Board

ʻElua papa: Papa kikohoʻe a me Papa CM, e hoʻohana ana i ʻehā mau mea hoʻohui papa-a-papa e hoʻouna i nā hōʻailona RF, nā hōʻailona kikohoʻe a me ka mana.

ʻElua mau mea hoʻohui MCX i hoʻohana ʻia no DOCSIS Downstream a me Upstream RF hōʻailona.ʻElua mau ʻāpana Pin Header/PCB Socket i hoʻohana ʻia no nā hōʻailona kikohoʻe a me ka mana.Waiho ʻia ka papa CM ma lalo o ka Papa Kikohoʻe.Hoʻopili ʻia ka CPU o CM i ka hale ma o ka pā wela e hoʻoneʻe i ka wela mai ka CPU a i ka hale a me ke kaiapuni.

ʻO ke kiʻekiʻe ma waena o nā papa ʻelua he 11.4+/-0.1mm.

Eia ke kiʻi o ka pilina papa-a-papa:

Nānā:

Ke kumu o ka hoʻolālā Papa-a-Papa no ʻelua Papa PCBA, i mea e hōʻoia ai i ka pilina paʻa a hilinaʻi, no laila, i ka wā

No ka hoʻolālā ʻana i ka hale, pono e noʻonoʻo ʻia ka ʻenekinia hui a me nā wili no ka hoʻoponopono ʻana.

J1, J2: 2.0mm 2x7 PCB Socket, kihi pololei,SMD

J1: Wehewehe Pin (Hoʻomaka)

J1 Pin	Papa CM Wahine, PCB Socket	Papa Kikohoʻe Kāne, Pin Header	Nā Manaʻo
1	GND
2	GND
3	TR1+		Nā hōʻailona Giga Ethernet mai ka papa CM. ʻAʻohe mea hoʻololi Ethernet ma ka papa CM, eia wale nā hōʻailona Ethernet MDI i ka Papa Kikohoʻe.Hoʻonoho ʻia ʻo RJ45 a me Ethernet transformer ma Digital Board.
4	TR1-
5	TR2+
6	TR2-
7	TR3+
8	TR3-
9	TR4+
10	TR4-
11	GND
12	GND
13	GND		Hāʻawi ka papa kikohoʻe i ka Power to CM board, ʻo ka pae pae mana;+ 12 a i + 24V DC
14	GND

J2: Wehewehe Pin (Hoʻomaka)

J2 Pin	Papa CM Wahine, PCB Socket	Papa Kikohoʻe Kāne, Pin Header	Nā Manaʻo
1	GND
2	Hoʻoponopono hou		Hiki i ka papa kikohoʻe ke hoʻouna i kahi hōʻailona hōʻailona i ka papa CM, a laila e hoʻihoʻi i ka CM.0 ~ 3.3VDC
3	GPIO_01		0 ~ 3.3VDC
4	GPIO_02		0 ~ 3.3VDC
5	Hiki iā UART		0 ~ 3.3VDC
6	UART Hoʻouna		0 ~ 3.3VDC
7	UART Loaʻa		0 ~ 3.3VDC
8	GND
9	GND		0 ~ 3.3VDC
10	SPI MOSI		0 ~ 3.3VDC
11	KAUKA SPI		0 ~ 3.3VDC
12	SPI MISO		0 ~ 3.3VDC
13	Koho SPI Chip 1		0 ~ 3.3VDC
14	GND